8455新葡萄娱集团am·(中国区)

GDS系列斜齿轮一蜗杆减速电机:由YE3系列电机、--级齿轮减速和蜗轮蜗杆组成的新型直角减速传动装置,该产品具有高精度、高效率、传递力矩大、可靠性强等显著优点。蜗轮级具有高减速比，运行时噪声低输出有单键实心轴，空心轴的轴装型,可以用单键、转矩支架或法兰连接。拥有多样的附件功能，广泛适用于各种低速驱动的机械没备,是机械传动的通用基础件。此外根据用户的要求,配装防爆电机、制动电机、变频器等特殊电机。

GDS Series Helical-Worm Reduction Motor: A New Type of Right Angle Reduction Drive Device Composed of YE3 Series Motor and First Grade Gear Reduction and Worm gear. The product has the advantages as high precision, high efficiency, great torque transmission and strong reliability. The worm gear stage has a high reduction ratio and low noise during operation.The output have two shaft assemble are single key solid shaft and the hollow shaft which can be connected by a single key or a torque bracket or a flange. With a variety of accessories functions, it is widely applicable in all kinds of low-speed drive machines devices and they are the universal basic parts of mechanical transmission. In addition, according to the customer's request, the explosion-proof motor, brake motor and frequency converter are equipped.Special motors, etc.

◆GDS系列斜齿轮一锥齿轮减速电机的技术特点

◆Technical features of GDS series helical gear reduction motors

1、齿轮传动采用高精度硬齿面齿轮;

Gear transmission adopts high precision hardened gear.

2、低噪声，运转平稳

Low noise, smooth operation

3、承载能力强，温升低，使用寿命长

Strong bearing capacity, low temperature rise and, long service life.

4、传动比分级精细,范围i=6~13800;

The transmission ratio is precise and the range is i=6~13800;

5、设计精巧，结构紧凑，体积小，安装简便

Designation is ingenious, Structure is compact,Volume is small,Installation is simple.

6、GDS系列是在模块组合体系的基础上设计的，可与不同的传动附件组合，满足不同的传动结构方案

GDS series is designed on the basis of modular combination system, and can be used withdifferent transmission accessories combination .To meet different transmission structure schemes.

带筋的高刚性铸铁箱体，齿轮采用优质高强度台金钢，表面渗碳硬化处理，经过精密加工，确保轴平行度和定位精度，这一切构成了齿轮传动的完美结合

High rigid cast iron box with ribs, gears made of high quality and high strength platen steel, surfacecarburizing and hardening treatment, through precision machining to ensure shaft parallelism And positioningaccuracy, all of which constitute the perfect combination of gear transmission.

◆GDS系列结构型式说明

Structure description of GDS series

GDS系列输出轴垂直于输入轴。由一级斜齿轮和一级蜗轮蜗杆构成,输入功率0.12~22kW,最大输出转矩4200N,m。

GDS series: the output shaft is perpendicular to the input shaft. Consisting of two grade helical and one grade Spiral-bevel gears. The input power is 0.12KM~ 22KM, The largest output torque 4200N.m.

1、GDS型:底脚安装。型号规格有GDS37...GDS97等7种。各型号结构尺寸请见相应结构尺寸表，功率及传动比见选型参数表。

GDS type: Foot-installation. There are 7 types specification ,it means GDS37... GDS97 and so on,The size of each types are shown in the corresponding structural dimensions table. power and transmission ratio can know from the selection parameter list.

2、GDKF型: B5法兰安装，输出轴为实心轴。型号规格有GDKF37...GDKF157等10种。各型号结构尺寸请见相应结构尺寸表，功率及传动比见选型参数表。

GDKF Type : B5 flange-installed, output shaft is solid shaft. There are 10 types specification ,it means GDKF37...GDKF157 and so on. The size of each types are shown in the corresponding structural dimensions table, power and transmission ratio can know from the selection parameter list.

3、GDSA型:空心轴安装。型号规格有GDSA37...GDSA97等7种，各型号结构尺寸请见相应结构尺寸。

GDSA Type: hollow shaft-installation.There are 7 types specification ,it means GDSA37...GDSA97 and so on.The size of each types are shown in the corresponding structural dimensions table, power and transmission ratio can know from the selection parameter list.

4、GDS...AD型:输入轴型,作为，上述各种机型的变型.品种,即不配电动机而配输入轴。

GDS...AD Type : Input shaft type, as the Varieties of the above variant models, they do not assemble the motor input but input shaft.

5、GDSA..T型:即在GDSA型上增加防转臂等附件后的派生型。各型号结构尺寸请见相应结构尺寸表。

GDSA...T Type:it is the derived by increasing the anti rotation arm and other accessories on the GDSA..T type. The size of each types are shown in the corresponding structural dimensions table.